How To Clean RGB Mousepad?

A mousepad, including an RGB mousepad, will get dirtier and nastier after some use, affecting the performance.

Dirt accumulation will soon wear out the cloth surface, change the mouse’s tracking course, and even drain the battery of the wireless pad, requiring frequent replacement.

Hence, the only way to ensure your RGB mousepad’s long life and accuracy, even after years, is to clean it regularly.

Clean the RGB mousepad by lightly soaking it in a warm, soapy water solution and scrubbing with a soft brush to remove grease. Do not forget to towel-rinse and air-dry it afterward.

Voila! Your RGB mousepad will become brand new in a few easy steps, but beware of short-circuiting the electronics.

Learn more about cleaning RGB mousepads and what materials you need.

Why Should You Clean The RGB Mousepad?

In short, cleaning the RGB mousepad helps keep it in better condition and prolongs its lifespan.

A mousepad is often laid around exposed over the desk, quickly accumulating dust, dirt, grime, and debris from food.

Moreover, the sweat and grease from your palm may easily seep into the cloth, creating a nasty surface.

Along with reducing the mousepad’s lifespan, it may create discomfort to the user, affect the mouse’s accuracy, and even encourage rips or tears.

Therefore, if you do not wish to replace your RGB mousepad quickly, you should gear up to clean it regularly.

A dirty mousepad may have more significant consequences than you can imagine.

1. It Affects The Speed

The grime found on the mousepad surface will create additional friction that will affect the speed of the mouse.

A slowed mouse movement can be disastrous for competitive gaming that requires swift cursor movement.

2. It Affects The Accuracy

The accuracy of the mouse depends on the mousepad surface’s tension, which is greatly hampered by the accumulation of dust particles and residue.

It affects the mouse’s tracking, primarily when using a trackball mouse.

3. It Shelters Germs And Allergens

The soft mousepad surface quickly collects dust, debris, and dirt, which invites a range of germs and allergens.

A hard mousepad may repel dirt and dust for a while, but failing to clean them seldom will leave the surface significantly dirtier.

4. It Reduces Lifespan

A clean and clutter-free mousepad will likely wear out quickly, ensuring a long life span.

The surface fabric is more likely to wear out when it retains a lot of dirt and grime, including tears, loosening, and scratches.

Hence, regularly cleaning them will prevent dirt from seeping into the fiber, ensuring durability.

Materials Required For Cleaning

Cleaning or maintaining an RGB mousepad does not require too many items.

You can easily clean it using household materials. Here is a list of items required to clean an RGB mousepad.

[table “20” not found /]

The use of each material may depend on the severity of dirt accumulation. Dry cleaning the mousepad with a screen cleaner and disinfecting it with rubbing alcohol would suffice.

However, always avoid the following items when cleaning your RGB mousepad.

• Washing machine and dryer
• Steel brush
• Toothbrush with hard bristles
• Industrial chemical cleaners

Step-by-Step Guide To Cleaning RGB Mouse Pad

Cleaning an RGB mousepad differs slightly from regular cleaning because it contains delicate electric parts, wires, and USB ports.

Here are some practical ways to clean your RGB mouse pad without damaging it.

Method #1: Dish Soap Scrubbing

1. Unplug your mousepad and move it to a dining table, side desk, or floor.
2. Prepare a mild solution of warm water and detergent or dish soap in a small bucket. (Ensure the water is not too hot)
3. Soak a dishwashing sponge (not steel) into the solution and wring it out.
4. Scrub the sponge throughout the mousepad surface until the dirt ultimately exerts.
5. For an unkempt mousepad, continue until you can remove all the oil and grease.
6. Soak a clean cloth or sponge in warm water and wipe the mouse pad surface to absorb all the dirt.
7. Use a microfiber or a clean cloth to wipe the mouse pad thoroughly to absorb excess liquid or pat dry.
8. Please leave it in an open space to let it dry out naturally.

Method #2 Dry Cleaning

1. Unplug your mousepad and move it to a dining table, side desk, or floor.
2. Run a hand vacuum over the mousepad to absorb dust particles.
3. Alternatively, you can run a blower but take the chore outside.
4. Spray some rubbing alcohol on the surface and gently wipe the surface using a microfiber cloth.
5. Continue the process until you get each section of the mousepad.
6. Leave it for 20-30 minutes to dry out.
7. Apply some screen cleaner or fabric protector to repel the liquid and prevent staining.

Method #3 Deep Cleaning

This method is only recommended for regular, fabric-based, or waterproof RGB mousepads.

1. Fill a bowl with warm water and mix some liquid or dish soap to create foam.
2. Submerge the mousepad into the bowl until the surface is thoroughly wet.
3. Take a scrubber and start rubbing across the mousepad surface in a light, circular motion.
4. It will absorb all the dirt, dust, and grime quickly.
5. Prevent stiff bristles or steel scrubbers that may rip the mousepad surface.
6. Rinse the mousepad with warm water until the entire soapy residue is gone.
7. Pat-dab the mousepad dry using a dry towel or microfiber cloth, leaving it to air.
8. It is best to leave it overnight or for 24 hours to let it completely dry.